Achieves 420℃ temperature profile
- PLC + PC control
- Heated zone flux management system
- PCB fall detection
- PCB counter
- Automatic oxygen concentration control mechanism
- Oxygen analyzer
- Intelligent stand-by mode
- Profile mode
- Divided fan control (divided into 3 blocks)
- Weekly timer
- Signal tower
- Conveyor special surface treatment (chain key materials and sprockets)
- Chiller unit
- Up/down mechanism of top-bottom labyrinth curtains
- Automatic conveyor width adjustment
- PCB warp prevention mechanism
- UPS
- In-out feeder free rollers
- Operator mode function
- Bar code setup change mechanism
- ECO-mode operation (divided into 8 blocks)
- Individually controlled mechanism for all zones
- SMEMA signal line
- Area sensor
- Specific color
- Display in English
| SNR-725GT-H | ||
|---|---|---|
| Dimensions (L×W×H) | 3,000 x 1,326 x 1,430 mm | |
| Conveyor height | 900±20 mm | |
| Conveyorr speed | 0.3 - 2.0 m/min | |
| Board dimensions | W: 50 - 250, L:100 - 300, T: 0.8 - 3.0 mm | |
| Component height | ≦10 mm [OP:35 mm], ≧5 mm [OP:25 mm] | |
| Heated zones | 7 | |
| cooling zones | 1 | |
| Upper limit temperature setting | 420 ℃ | |
| Soldering margin | 3 or 4 or 5 mm | |
| N2 (Nitrogen) gas supply | ≧99.999%, ≧0.4MPaG, max. 300NL/min | |
| N2 (Nitrogen) gas usage | Component height/STD：≦10mm, ≧5mm | 200NL/min |
| Power requirement | 200 V, max. 30 kw, 90A, 3-phase | |
